Field Logistics & Support
Integrated Logistic Support
Career
About us
Home
Materials, Design & Other Characteristics :
DHK's ARC8™ ArcPlus™ pants are
manufactured with a single layer of inherently flame resistant fabric. Two front, two back pockets and 7 belt loops are standard features. Buttons are sewn on using a diagonal stitch. All seams are safety stitched for strength and durability. All components including buttons, labels, Nomex® zipper tape, Nomex® threads and Nomex® inter-liners are flame resistant.
Arc Rating : 8.3 cal/cm² ATPV
 
Color : Navy Blue & Gold
 
Fabric : 6.2 oz/yd², DHK Comfort Plus™
 
Fiber Content : 79% aramid, 20% modacrylic, and 1% antistatic fiber.
 
Sizes :Waist sizes range from 26” to 52” in increments of 2’’. For inseams and outseams see chart below.
 
Standards : Complies with NFPA 70E-2004 & ASTM F1506-02a. Tested according to ASTM F1959-04.
 
 
Use : DHK’s ARC8™ ArcPlus™ pants are designed to provide protection from arc flash heat exposures. According to NFPA 70E Hazard Risk Category (HRC) levels, this garment equals the 8 cal/cm² minimum requirement for Hazard Risk Category 2. Be aware that the arc rating (ATPV) of a fabric, as defined in ASTM F1959-04, indicates a 50% probability of a second-degree burn based on the Stoll curve. Consult the ARC8™ clothing labels or BIRG™ (Burn Injury Reduction Guide SM ) for
reduced probability of a burn injury. Always perform a hazard analysis and use higher protection than the hazard you are facing.
Cleaning Instructions & Maintenance :All garments should be free of contaminants. Flammable contaminants can reduce protection level. Garments can be machine washed with detergent and tumble-dried. Oberon’s inherently flame resistant garments will not lose the flame resistant properties of the fabrics due to laundering of the garment.
BIRG
50%
 
8.3 cal/cm 2
40%
7.8cal/cm 2
30%
7.6cal/cm 2
20%
7.4cal/cm 2
10%
7.1cal/cm 2
5%
6.9cal/cm 2
1%
6.2cal/cm 2
Sizing Chart :
Inseams*
26’’
28"
30"
32"
34"
36"
Outseams
36"
38"
40"
42"
44"
46"
* Inseams can be unfinished or hemmed