DHK’s ARC Flash suits are the lightest weight garment in the market for the protection they offers. This accomplishment is part of DHK's ongoing research and development for a safer workplace with high-tech materials.DHK’s ARC Flash suit are designed to provide protection from arc flash heat exposures. All Suits Complies with NFPA 70E-2004 and ASTM F1506-02a. Tested according to ANSI Z87.1-2003, ASTM F1959-04 and ASTM F2178-02.

DHK’s ArcPlus™ coveralls are manufactured with a single layer of inherently flame resistant fabric. All seams are safety stitched for strength and durability. All components including buttons, labels, Nomex® threads, Nomex® cuffs, Nomex® Velcro™, and Nomex® zipper tape are flame resistant. DHK’s ArcPlus™ coveralls Complies with NFPA 70E-2004 & ASTM F1506-02a. Tested according to ASTM F1959-04.

DHK's ArcPlus™ shirts are manufactured with a single layer of inherently flame resistant fabric. A left-front pocket with a buttoned down flap and a penholder is a standard feature. The buttons of the button down collar are large to reduce breakage and improve ease of buttoning. All components including buttons, labels, Nomex® threads, and Nomex® inter-liners are flame resistant. DHK's ArcPlus™ shirts Complies with NFPA 70E-2004 & ASTM F1506-02a. Tested according to ASTM F1959-04.

Pullover Hooded Sweatshirts are manufactured with a single layer of a tubular knit inherently flame resistant fabric. Basic construction with three-thread overlock for strength and durability. Front pouch with two connected openings on the sides.

DHK's ArcPlus™ Dailywear Pants are manufactured with a single layer of inherently flame resistant fabric. Two front, two back pockets and 7 belt loops are standard features. Buttons are sewn on using a diagonal stitch. All components including buttons, labels, Nomex® zipper tape, Nomex® threads and Nomex® inter-liners are flame resistant. Waist sizes range from 26” to 52” in increments of 2’’. Complies with NFPA 70E-2004 & ASTM F1506-02a. Tested according to ASTM F1959-04.

DHK's ArcShield™ is manufactured by an injection molding process with a mix of polycarbonate and DHK's proprietary ArcX™ energy absorbing material. This high-tech material allows a visible light transmission of an amazing 61%. The ArcShield arc rating (ATPV) is 12 cal/cm². The outer surface is available with DHK's proprietary material Silicote™-1 scratch resistant coating (up to five times longer product life). The deluxe version of the ArcShield comes with a permanent antifog coating on the inner surface

Type I insulating gloves, made with 100% naturalrubber. A latex seamless manufacturing process gives a smooth finish to the rubber. Classes 00 & 0 have a rolled ending cuff. Class 1 & 2 gloves have a straight cut cuff. Also available from DHK Classes 3 & 4insulating gloves